| Typical Parameters @ 25°C | Typical Value | Units | |
| Wavelength | 780 – 980 | nm | |
| Operation Mode | QCW | CW | |
| Array Peak Output Power | 600 – 4000 | 60 – 200 | W |
| Bar Emission Length | 10 | mm | |
| Number of Bars | 3 – 20 | 3 – 5 | # |
| Operating Current | 170 | 50 | A |
| Operating Voltage (per bar) | 2 | V | |
| Power Conversion Efficiency | 55 | % | |
| Bar to Bar Pitch | 400 (min) | µ | |
| Pulse Width | 300 (max) | ms | |
| Duty Cycle | 5 (max) | % | |
| Beam Divergence FWHM | 33×6 | 37×7 | ° |
| Beam Divergence FWHM (lensed) | 1×6 | 1×7 | ° |
Laser Diodes
Derringer Package
The Derringer Package features a proprietary water cooling design that enables excellent heat extraction without the need for deionized water. The arrays are well-suited to side-pumping of solid-state laser (SSL) crystals, as well as direct diode applications which require multiple bars in a linear configuration. The package is available with 3, 4, and 5-long options, with respective emission outputs of approximately 3 cm – 5 cm.
CW output powers of up to 200 W are available in packages assembled with either Indium (soft) solder, or with expansion matched materials and hard solder. For pulsed arrays, the standard maximum output is 4 kW. Custom options with higher peak powers can be configured.
Features
- Filtered (non-DI) Water Cooled
- Assembled with Hard Solder & Expansion Matched Materials
- Economic (Soft Solder) Options Available
- Multi-Wavelength Configurations
Typical Dimensions
Typical Specifications
DownloadsProduct VideoCapability Video
Popular Applications
CONTACT THE SALES TEAM TO FIND THE BEST SOLUTION FOR YOUR PROJECT
Fill out the form below and we will get back to you shortly
